For non-technical users, how do we install and use the X-PHY® AI Embedded Cyber Secure SSD?

Installing the X-PHY® AI Embedded Cyber Secure SSD on your device is a simple process. If you purchased a pre-installed X-PHY® AI Embedded Cyber Secure SSD Cybersecurity Laptop, the X-PHY® Guard PC Application Tool is already set up and ready to use. However, if you purchased an X-PHY® AI Embedded Cyber Secure SSD, the process of installing it is similar to installing any other M.2 SSD.

Here's what you need to do to install the X-PHY® AI Embedded Cyber Secure SSD:

1. Data Migration: Connect your X-PHY® AI Embedded Cyber Secure SSD to your device and make sure your data is safely transferred and secured from cyber threats. 

2. Install the X-PHY® Guard PC Application Tool

3. Install X-PHY® AI Embedded Cyber Secure SSD Connect on Your Mobile Device: Android | iOS

4. Physical Installation: Remove the old M.2 SSD from the M.2 slot by unscrewing the screw and insert the X-PHY® AI Embedded Cyber Secure SSD into the slot and secure it back with the screw.

5. Clone or Reinstall Windows Operating System: You may clone the old operating system to the new SSD or reinstall the operating system.

Alternatively, A video on the Quick Start Process is available that can guide you through the entire installation process. Click Here.

You can also find step-by-step installation instructions for the X-PHY® AI Embedded Cyber Secure SSD in our quickstart guide here.